VBA-4E3A-G12-ZAJ/EA2L
Цена по запросу
Параметры
| Входы питания | Внутренний (от AS-i) |
|---|---|
| Выходы питания | Внешний (от AUX) |
| Выходы модуля | 3 |
| Стиль корпуса | G12 |
| Место монтажа | Полевой монтаж |
| Входы модуля | 4 |
| Тип модуля | Цифровые I/O |
| Подключение I/O | M12 |
| Тип узла | A/B узел |
Технические характеристики
The VBA-4E3A-G12-ZA/EA2L is an AS-Interface trigger module with 4 inputs and 3 outputs. 2- and 3-wire sensors as well as mechanical contacts can be connected to the plus switching electronic inputs. The outputs are electronic outputs which can be energized with max. 24 V DC and 2 A per output.
The solid housing permits fast mounting without tools as well as easy removal without tools. The stainless steel shell and the cast housing ensure durability and a high protection category.
The connection to the AS-Interface calbe and to the external power supply is achieved via penetration technology in the integrated flat cable. The insert for the flat cables can be turned in two orientations.
All connections to inputs and outputs are implemented via metal inserts for high stability. The connection to the sensors/actuators is achieved via a M12 x 1 circular connector with SPEEDCON quick locking option.
The inputs and the connected sensors are supplied from the internal power supply of the module (from AS-Interface), the outputs and the connected actuators via an external power source (AUX).
To indicate the current switching state there is an LED for each channel fitted to the top of the module. The outputs are protected against overload and short circuit, an output overload is indicated via an LED per channel.
An LED to indicate the AS-Interface voltage and that the module has an address of 0 is available, another indicates errors in the AS-Interface communication as well as periphery faults. Another LED indicates the external power supply (AUX).
This module can be mounted in any position using three screws or can be snapped onto the DIN rail using the stainless steel holder.
An output overload is reported to the AS-Interface master via the function «periphery fault». The communcation with the AS-Interface remains intact.
| Описание продукта |
|---|
| Плоский модуль G12, 4 входа (PNP) и 3 электронных выхода |
| Основные Характеристики | ||
|---|---|---|
| Node type | Узел A/B | |
| Спецификация AS-интерфейса | В3.0 | |
| Требуемая спецификация шлюза | ≥ V2.1 | |
| Профиль | S-7.A.2 | |
| Код ввода-вывода | 7 | |
| Код ID | A | |
| Код ID1 | 7 | |
| Код ID2 | 2 | |
| UL File Number | E223772 | |
| Индикаторы/средства управления | ||
| СВЕТОДИОДНАЯ НЕИСПРАВНОСТЬ | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or outputs |
|
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
|
| Светодиод AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
|
| LED IN | Состояние переключения (вход); 4 светодиода жёлтого цвета | |
| LED OUT | Switching status (output); 3 yellow/red LEDs Yellow: output active Red: output overload |
|
| Электрические характеристики | ||
| Вспомогательное напряжение (выход) | 24 В DC ± 15 % PELV | |
| Номинальное рабочее напряжение | 26,5 … 31,6 В от AS-Interface | |
| Номинальный рабочий ток | ≤ 40 мА (без датчиков) / макс. 240 мА | |
| Класс защиты | Класс защиты | |
| Защита от перегрузки | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) derived from mains up to 300 V AC line-to-neutral | |
| Вход | ||
| Номер/Тип | 4 inputs for 2- or 3-wire sensors (PNP), DC option 2 inputs for 4-wire sensors (PNP), DC |
|
| Питание | Параметр ‘Питание’, Категория ‘Вход’. | |
| Напряжение | 21 … 31 В | |
| Текущая нагрузочная способность | ≤ 200 мА, защищено от перегрузки и короткого замыкания | |
| Входной ток | ≤ 8 мА (ограничено внутренне) | |
| Точка переключения | в соответствии с DIN EN 61131-2 (Тип 2) | |
| 0 (неослабленный) | ≤ 2 мА | |
| 1 (ослабленный) | ≥ 6 мА | |
| Задержка сигнала | < 1 мс (вход/AS-Interface) | |
| Выход | ||
| Номер/Тип | 3 электронных выхода, PNP, защищены от перегрузки и короткого замыкания | |
| Питание | from external auxiliary voltage UAUX | |
| Напряжение | ≥ (UAUX — 0.5 V) | |
| Ток | 2 A per output 6 A total (TB ≤ 40 °C) 4 A total (TB ≤ 70 °C) |
|
| Соответствие директивам | ||
| Электромагнитная совместимость | ||
| Directive 2014/30/EU | EN 62026-2:2013 | |
| Стандарты соответствия | ||
| Степень защиты | EN 60529:2000 | |
| Стандарт Fieldbus | EN 62026-2:2013 | |
| Вход | EN 61131-2 | |
| Излучаемые помехи | EN 61000-6-4:2007 | |
| AS-Интерфейс | EN 62026-2:2013 | |
| Помехоустойчивость | EN 61000-6-2:2005 EN 62026-2:2013 | |
| Условия окружающей среды | ||
| Температура окружающей среды | -25 … 70 °C (-13 … 158 °F) | |
| Температура хранения | -25 … 85 °C (-13 … 185 °F) | |
| Относительная влажность | 85 %, без конденсации | |
| Высота | ≤ 2000 м над уровнем моря | |
| Ударопрочность | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
|
| Устойчивость к вибрации | 0,75 мм 10 … 57 Гц, 5 g 57 … 150 Гц, 20 циклов | |
| Степень загрязнения | 3 | |
| Механические характеристики | ||
| Степень защиты | IP67 | |
| Связь | Cable piercing method flat cable yellow/flat cable black inputs/outputs: M12 round connector |
|
| Материал | ||
| Корпус | ПБТ | |
| Масса | 230 г | |
| Момент затяжки кабельного ввода | 0,4 Н·м | |
| Размеры | ||
| Высота | 35 мм | |
| Ширина | 57,4 мм | |
| Длина | 151,6 мм | |
| Монтаж | Монтажная плита | |
