VAA-4E4A-G11-ZAJ/EA2L-FV1
Цена по запросу
Параметры
| Входы питания | Внутренний (от AS-i) |
|---|---|
| Выходы питания | Внешний (от AUX) |
| Выходы модуля | 4 |
| Стиль корпуса | G11 |
| Место монтажа | Полевой монтаж |
| Входы модуля | 4 |
| Тип модуля | Цифровые I/O |
| Подключение I/O | M12 |
| Тип узла | Стандартный узел |
Технические характеристики
The VAA-4E4A-G11-ZAJ/EA2L-FV1 is an AS-Interface switch-on module with 4 inputs and 4 outputs. 2, 3 and 4 wire sensors can also be connected as mechanical contacts to the 4 sourcing electronic inputs. The 4 electronic outputs are overload and short-circuit protected.
The housing with a central screw enables fast mounting on the base plate.
The connection to the AS-Interface cable, to the external power supply and to the sensors/ actuators is via M12x1 plug-in connections on the top side of the device.
You can also make the connection to the AS-Interface and to the external energy supply with insulation piercing technology via an AS-Interface flat cable on the underside of the module.
The inputs and the connected sensors are powered by the internal supply of the module (from the AS-Interface). The outputs and the connected actuators are powered by an external voltage source (from the AUX).
The current switching state of each input and output is indicated via an IN or OUT LED. The OUT LED also indicates an overload or a lead breakage at the associated output. The AS-i/FAULT LED indicates the status of the AS-Interface (normal operation, communication error, peripheral fault, address 0). The AUX LED indicates the external power supply. The switch-on module is compatible with AS-Interface POWER24.
Note:
The device is equipped with a communication monitor, which deactivates the outputs if the AS-Interface does not communicate with the module for more than 40 ms. The communication monitor can be deactivated via the parameter P0. Filters that suppress pulses with a duration of 2 ms or less at the inputs can be connected via the parameter P1.
Parameter P2 activates a lead breakage detection system for the outputs. This function detects and reports a missing load, providing the relevant output is deactivated. The associated OUT LED and the ‘peripheral fault’ function display the signal transmitted to the AS-Interface master. An overload of the input supply or the outputs is also reported to the AS-Interface master via the ‘peripheral fault’ function. Communication via the ASInterface continues even if a peripheral fault is set.
| Описание продукта |
|---|
| G11 module 4 inputs and 4 outputs |
| Основные Характеристики | ||
|---|---|---|
| Node type | Стандартный узел | |
| Спецификация AS-интерфейса | В3.0 | |
| Требуемая спецификация шлюза | ≥ V2.1 | |
| Профиль | S-7.F | |
| Код ввода-вывода | 7 | |
| Код ID | F | |
| Код ID1 | F | |
| Код ID2 | Параметр ‘Код ID2’, Категория ‘Общие характеристики’. | |
| UL File Number | E223772 | |
| Индикаторы/средства управления | ||
| Светодиод AS-i/НЕИСПРАВНОСТЬ | Status display; multi-colour LED Green: normal operation Red: communication fault Flashing yellow/red: address 0 Flashing green/red: sensor supply i.e. overload or lead interruption outputs |
|
| Светодиод AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
|
| LED IN | Состояние переключения (вход); 4 светодиода жёлтого цвета | |
| LED OUT | switching state (output); 4 LED yellow/red yellow: output active red: output overload or lead interruption |
|
| Электрические характеристики | ||
| Вспомогательное напряжение (выход) | 20 … 30 В DC PELV | |
| Номинальное рабочее напряжение | 18,0 … 31,6 В от AS-Interface | |
| Номинальный рабочий ток | ≤ 40 мА (без датчиков) / макс. 240 мА | |
| Класс защиты | Класс защиты | |
| Защита от перегрузки | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) | |
| Вход | ||
| Номер/Тип | 4 inputs for 2- or 3-wire sensors (PNP), DC option 2 inputs for 4-wire sensors (PNP), DC |
|
| Питание | Параметр ‘Питание’, Категория ‘Вход’. | |
| Напряжение | 12 … 31 В | |
| Текущая нагрузочная способность | ≤ 200 мА, защищено от перегрузки и короткого замыкания | |
| Входной ток | ≤ 9 мА (ограничено внутренне) | |
| Точка переключения | в соответствии с DIN EN 61131-2 (Тип 2) | |
| 0 (неослабленный) | ≤ 3 мА | |
| 1 (ослабленный) | ≥ 5 мА | |
| Задержка сигнала | < 1 мс (вход/AS-Interface) | |
| Выход | ||
| Номер/Тип | 4 электронных выхода, PNP, защита от перегрузки и короткого замыкания | |
| Питание | from external auxiliary voltage UAUX | |
| Напряжение | ≥ (UAUX — 0.5 V) | |
| Ток | 2 A per output TB ≤ 40 °C: 6 A total TB ≤ 70 °C: sum O1 + O2 max. 2 A, sum O3 + O4 max. 2 A |
|
| Гальваническая развязка | ||
| Вход/Выход | Безопасная изоляция, номинальное изоляционное напряжение 40 В DC | |
| Выход/AS-Interface | Безопасная изоляция, номинальное изоляционное напряжение 40 В DC | |
| Соответствие директивам | ||
| Электромагнитная совместимость | ||
| Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007 | |
| Стандарты соответствия | ||
| Степень защиты | EN 60529:2000 | |
| Стандарт Fieldbus | EN 62026-2:2013 | |
| Вход | EN 61131-2:2007 | |
| Излучаемые помехи | EN 61000-6-4:2007 | |
| AS-Интерфейс | EN 62026-2:2013 | |
| Помехоустойчивость | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 | |
| Условия окружающей среды | ||
| Температура окружающей среды | -25 … 70 °C (-13 … 158 °F) | |
| Температура хранения | -25 … 85 °C (-13 … 185 °F) | |
| Относительная влажность | 85 %, без конденсации | |
| Климатические условия | Только для использования в помещении. | |
| Высота | ≤ 2000 м над уровнем моря | |
| Ударопрочность | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
|
| Устойчивость к вибрации | 0,75 мм 10 … 57 Гц, 5 g 57 … 150 Гц, 20 циклов | |
| Степень загрязнения | 3 | |
| Механические характеристики | ||
| Степень защиты | IP68 / IP69K | |
| Связь | AS-Interface/UAUX: AS-Interface flat cable or M12 round connector Inputs/outputs: M12 round connector |
|
| Материал | ||
| Корпус | ПБТ ПК | |
| Крепежный винт | Нержавеющая сталь 1.4305 / AISI 303 | |
| Масса | 200 г | |
| Момент затяжки винтов корпуса | 1,8 Н·м | |
| Момент затяжки кабельного ввода | 0,4 Н·м | |
| Монтаж | Монтажная плита | |
